General
Ditch Witch Model 1030 Self-propelled Walk-behind, Manually Steered, Two-wheel Drive, Rigid-frame, Chain-type Trencher
Dimensions* U.s. Metric
Trench Depth, Max. 24"
Angle Of Approach 35°
Angle Of Departure 65°
Trench Width 4.3 In
Boom Travel, Down 60°
Boom Travel, Up 47°
Centerline Trench To Outside Edge Of Machine, Left 15 In 381 Mm
Centerline Trench To Outside Edge Of Machine, Right 17 In 432 Mm
Headshaft Height, Digging Chain 8.6 In 220 Mm
Transport Height 47 In 1.17 M
Transport Length 88 In 2.24 M
Wheelbase 32 In 813 Mm
Spoils Discharge Reach 10.6 In 270 Mm
Width, Transport 32 In 813 Mm
Tread 26 In 660 Mm
Operation U.s. Metric
Vehicle Speeds 155 Fpm 47 M/min
Digging Chain Speed 276 Fpm 84 M/min
Spoils Handling (single, Open-end Auger) Auger-size
Outer Diameter 12 In 305 Mm
Inner Diameter 4 In 102 Mm
Length 9 In 229 Mm
Operating Weight (based On Roller Boom And Narrow-width Digging Chain) 900 Lb 408 Kg
Power U.s. Metric
Engine Honda Gx340
Type 4-stroke, Overhead Valve
Fuel Gasoline
Cooling Medium Air
Number Of Cylinders 1
Displacement 20.6 In3 337 Cm3
Bore 3.2 In 82 Mm
Stroke 2.5 In 64 Mm
Manufacturer's Power Rating 11 Hp 8.2 Kw
Rated Speed 3400 Rpm
Power Train
Ground Drive Transmission: Hydrostatic, Infinitely Variable From Zero To Maximum, Gearbox To Axle, Speed And Direction Controlled With Single Lever
Pump Drive Clutch: Mechanical, Hand-operated, Spring-loaded With Tension Roller For Belt Drive
Digging Chain Clutch: Mechanical, Hand-operated, Spring-loaded With Tension Roller For Belt Drive
Trencher Drive: Mechanical; Belt Drive To Reduction Drive, Headshaft
Belt: 2-groove Power Band
Digging Chain: 33,000-lb (15 000 Kg) Or 35,000-lb (15 875 Kg) Test
Chain Drive Sprocket: Forged And Tempered
Spoils Handling Drive: Mechanical, Attached To And Rotates With Headshaft
Tires/pressure U.s. Metric
Drive, Standard 16 X 6.50-8; 28 Psi 193 Kpa
Drive, Optional 18 X 8.50-8; 22 Psi 152 Kpa
Trail 13 X 5.00-6; 20 Psi 138 Kpa
Hydraulic System U.s. Metric
Drive Pump Capacity @ 2500 Rpm 9.8 Gpm 37.1 L/min
Filtration Return Flow, 10 Micron Nominal
Hydraulic Drive Motor
Torque @ 1000 Psi (69 Bar) And 9.8 Gpm (37 L/min) 643 In·lb 730 N·m
Speed @ 1000 Psi (69 Bar) And 9.8 (37 L/min) 410 Rpm
Displacement 5.4 In3/rev 88.5 Cm3/rev
Type Bi-directional
Fluid Capacities U.s. Metric
Fuel Tank 1.7 Gal 6.5 L
Engine Oil 2.3 Pt 1.1 L
Hydraulic Reservoir 4.5 Gal 17 L
Hydraulic System 5 Gal 18.9 L
Axle Oil 2.8 Pt 1.3 L
Headshaft Gearbox Oil 2 Pt 1 L
