With A Powerful 3/4 Hp Motor And A 104 Cfm, 3.0 Psi Blower, The Force/1 Will Insulate A 1,000 Sqf Attic To An R19 Value In Just Over 1 Hour! ¹
Exceptional Performance
Today's Customers Demand Nothing Less Than A Reliable, Solid Performer That Is Easy To Use. That's Why The Force/1 Is So Successful. It Is The Only Do-it-yourself Machine Capable Of Blowing Over 500 Lbs Of Material Per Hour.
Total Reliability
Because No Insulation Material Actually Goes Through The Blower, The Force/1 Is A Virtual Workhorse, Requiring Only Minimal Maintenance And Downtime. Direct Drive Means There Are No Chains That Wear Out Or Need To Be Adjusted, Ever.
And Ease Of Use
Setting Up The Force/1 On A Job Site Is Simple, Quick And Easy. And Clean-up At The End Of The Job Is Equally Efficient. Performance, Reliability And Ease Of Use: Together They Make The Force/1 The Insulation Blower Of Choice.
The Force/1 Comes Complete With:
100 Feet Of 2 ½ Inch Blowing Hose
One 2 ½ Inch Stainless Steel Hose Connector
Three 2 ½ Inch Stainless Steel Hose Clamps
50 Foot Attached Power Cord
100 Foot Dual Remote Control
6 Inch Wheels
Pinset Material Slide Gate
• Polyethylene Construction
• 100’ Attached Dual Remote
• 50’ 14/3 Attached Power Cord
• Direct Drive Transmission
• ¾ Hp Agitator Motor
• 6–vane Airlock Chamber
• Urethane Airlock Seals
• Agitator Motor Relay Control New!
Machine Options
Height 41"
Width 32 ¼"
Weight 177 Lbs.
Hopper Capacity 4¼ Cu. Ft. — 25 Lbs.
Hose Size 2 ½"
Blower 2–stage, 8 Amps, 104 Cfm,
3.0 Psi (avg)
Drive Motor ¾ Hp - 8.4 Amps
Transmission Custom, Direct Drive
Airlock 10" Steel
Electric 115v/220v 50/60hz
Power Requirements One 20 Amp, 115v Circuit
Agitator 3 Vane, Crs
